At the heart of the Deepsea’s case is Rolex’s patented Ringlock system, which uses a super hard, nitrogen-alloyed steel central ring to internally support both the extra-thick sapphire crystal and the Grade 5 titanium caseback. While the Ringlock system is largely responsible for the overall increase in the case size of the Deepsea, it actually enables the watch to be smaller than it otherwise would be, had it were to follow a more traditional case design while still retaining its same colossal depth rating.The primary purpose of the Ringlock system is to reduce the amount of stress placed on the case of the watch. As pressure on the watch increases at greater depths, the majority of it gets exerted on the front and back surfaces of the watch. Since the nitrogen-alloyed stainless steel compression ring internally supports both the crystal and the caseback of the Deepsea, the amount of force exerted on the actual case itself remains relatively minimal. Additionally, as the crystal and caseback get squeezed together, with the majority of the force being supported by the internal compression ring, the front and back gaskets of the watch get pressed together, ensuring an extra tight seal.The caseback on the Rolex Deepsea consists of two components: an inner caseback made from Grade 5 titanium, and an outer, screw-down caseback ring that is constructed from Oystersteel (904L stainless steel). With a traditional, single-piece, caseback design, the entirety of the pressure placed on caseback gets exerted on the case of the watch itself, particularly near the threads. By separating the caseback into two components, Rolex is able to redistribute much of the force being exerted on the rear surface of the watch. The outer, screw-down ring performs the sole duty of keeping the inner, titanium caseback tight on the watch, while the nitrogen-alloyed steel compression ring ultimately supports all the pressure being exerted on the titanium case-back itself.
Case is measured to be 41mm in diameter, 14.8mm thick, which includes the crystal glass thickness. The case is 1:1 replicated from original so it has the same size as genuine.Dial is black. Iconic Tudor’s reverse hour hand and shield logo in golden color. Those round hour markers are filled with white Swiss SuperLume material while having yellow gold edge, so are hands. At 3 o’clock, there is a small window displaying date that features black date font in white background. The dial will emit strong green light in dark place, the green dial lume on the replica is the same as genuine.Black dial is protected by sapphire crystal, which is dome shaped and features colorless double-sided AR Coating. With this advantage and see from any angle, the dial will be clearly readable even under sun light condition.Besides the domed crystal face, another element that adds some vintage favor to this replica is its special rivet bracelet, which is made of 316L stainless steel and its central link has 5-mils yello gold coating. The two tone bracelet has a deployant clasp, when the clasp is folded, it looks like a big Tudor shield logo. If you are interested in buying the replica, please check its specification in the following.Movement: Swiss ETA 2824-2 Automatic, 25 Jewels, 28800bph, Nickle Plated Case: 41mm*14.8mm, 316L Stainless Steel, Uni-Directional Rotating Bezel Crystal: Domed Sapphire with Colorless AR Coating, Double Sided Dial: Black with Superlumed Hour Markers and Hands Bracelet: Two Tone, Steel and Yellow Gold Plated Water Resistant: 50m V10 Rolex Sea-Dweller DEEPSEA 116660 D-Blue Made with 904L Stainless Steel Unveiled by Noob(new updated 126660) The Sea-Dweller DEEPSEA 116660 is one of the best-selling replica Rolex watches in the past, since Noob firstly used 904L stainless steel on the Batman GMT and Submariner, DEEPSEA 116660 is not as popular as Noob’s other flagship products like Daytona V3, Submariner V10, etc. Now, Noob published the latest V10 edition of this replica Rolex D-Blue 116660, I think it will become hot again, many of you guys who bought this watch before may want to replace by this one that is made with 904L stainless steel.This is a big watch that is specially designed for robust guys, case diameter is up to 43mm, and almost 17.5mm thick, not many people are willing to choose D-Blue 116660 as their first watch because it is really too big. And due to the new 904L stainless steel material on case and bracelet, the watch feels heavier than before.Besides 904L stainless steel case material, another big change on this V10 DEEPSEA 116660 lies in the movement, which is changed to Super Clone 3235. In all previous versions, Noob used 3135 movement, this is a big progress they made on this watch.On the V10 edition of DEEPSEA Sea-Dweller D-Blue 116660, Noob also claimed that the ceramic material used on the bezel is upgraded, they said this ceramic is different from that of previous Noob Ceramic watches, this ceramic is imported, so I suppose that they have a special channel to get the ceramic material used in the real watch, so that they have the confidence to said the ceramic is Swiss quality.The gradient dial is classic, the upper half on top is blue, the lower half below is black, such dial color design exactly meets the main theme which this watch wants to represents – the challenge to deep sea. After being improved many times, the gradient dial color looks more natural now.The bracelet is made with 904L stainless steel that is fully brushed, the bracelet is long and does not suit people who have small wrist. This bracelet would be the best fit for such a big watch, other leather or nylon band, while I think is impossible to bear the heavy weight of the case. Inside the case, there is a clone 3235 machine, actually Noob has installed this machine in its previous Single Red Sea-Dweller 126600, the movement has all necessary information engraved on the plates and rotor in gold tone, Noob factory also offers another movement option for this watch, that is a clone ETA 2836.AR factory also makes this watch, I think it is the main competitor of Noob. AR has improved this replica three times, the latest edition is V3, it is also made with 904L stainless steel, while with better case and bracelet finish I think, the movement in ARF 116660 is a clone ETA 2824, while it is also a good movement choice.
Sticking with undersea operations, the Oris ProDiver collection is an interesting one, given that Oris is one of the few watch companies that remains actively engaged in dealings with commercial divers. More specifically, Roman Frischknecht is a commercial diver that has been an Oris ambassador for some time, and rather than simply being an ambassador in name, Roman has played a crucial role in the development of the ProDiver collection ahead of its launch in 2009.It was his insight that led to the creation of the brand’s bezel locking system, known as a Rotation Safety System. Given the level of safety and security protocols involved in his line of work, Roman knew that if he was to be using a conventional dive watch in a modern dive environment, there could be absolutely no room for error, thus a locking mechanism (as seen in other divers like the Omega Ploprof, among others) would be mandatory.Although the roots of the Yacht-Master II relate to activities on the water’s surface rather than deep below, its unique functionality is perfectly suited to this category. After all, the Rolex Yacht-Master II is what is often referred to as yachting timer – a countdown chronograph that can be used to properly measure the start time of a regatta, also known as a sailing race.Arguably the most complex watch in the present Rolex collection, the Yacht-Master II uses an interesting combination of bezel position, crown position, and pusher action in order to set its countdown duration between 1 and 10 minutes, with the chronograph capable of flyback (or fly-forward) functionality to the pre-set time with a single activation of its lower pusher. While many Yacht-Master II wearers are unlikely to ever use this highly specific function for its actual intended purpose. being able to run a countdown like this isn’t shy on practical daily-life applications… grilling timer, anyone?
GS is a factory that only made some ladies watches in the past, the Longines PrimaLuna replica they made has a good quality. About this IWC Mark XVIII IW327006 replica, two factories are making it, GS and V7. In machine, V7 installs a genuine ETA 2892, but the price is expensive. GS factory uses an Asian clone ETA 2892 movement inside the replica, it is based on our Sea-Gull 2892, so the replica has a cheaper price, more cost-effective than V7’s. Before we go a deep review of replica IWC Mark XVIII Titanium Watch, let’s check its specification first.The case is made of high grade Titanium, compared with 316L stainless steel, Titanium has a better performance of scratch and corrosion resistance, Titanium case reduces the whole weight of the replica watch, it is more comfortable for daily wear. Put this replica besides a genuine watch, you can not tell which one is replica. 40mm case has the same size as genuine, sapphire crystal face has a good reflective effect, high quality calf skin leather band and hand stitching have no difference.
This watch is very new, published in 2018. It is loved by many people because of its unique waved dial. The replica Omega Seamaster is made by VS factory, and the latest version has come to be V2. Both dial and bezel use ceramic like genuine watch. There are three types of bands for this replica, stainless steel, nylon and rubber. You can buy the replica with stainless steel bracelet, the factory will send one pair of nylon band to you for free. The movement inside is based on an Asia ETA 2836, VS factory modified it to the look of Omega 8800.OM factory makes the best Omega Speedmaster Chrono replica watches. Yes, only OM factory can make it correct. The Clone 9301 movement they developed can achieve a full chronograph function like genuine. I mean the two hands on the subdial at 3 o’clock can work like genuine watch. Please note, the 3:00 subdial has dual chronograph function for minute and hour chronograph. This Omega Speedmaster Dark Side of The Moon replica watch use a full ceramic case, a black nylon band is fitted, for the clasp, you can choose deployant or tang style.
It is a nice big-crown Submariner, there is a Rolex Crown Logo on face, while under the crown logo, it is “BREVET” not “ROLEX”. Almost all vintage Rolex watches adopt domed plexi plastic crystal face, so does this one.The dial is black, featuring yellowish hour markers and printings. Benz hands are a bit narrower, not that wide on modern Submariners. The printing “200m = 600ft” says that genuine 6538 could be water resistant to 200 meters, however, this replica has been tested in factory to be 30m waterproof. The dial and bezel pearl all emit strong green light in dark place.The replica big crown 6538 Submariner is equipped with an Asian ETA 2836-2 movement, which is modified from a Chinese Sea-Gull automatic movement. Many readers who have sent me inquiries asked to equip real Swiss ETA movement in their watches, the truth is that some replica watches could be equipped with real Swiss ETA calibre, but some vintage Rolex like this one is not able to be installed.The King in Deep Sea Diving – Replica Rolex D-Blue 116660 James Cameron WatchTo pay tribute to the historic diving depth record which James Cameron created, Rolex published Deepsea D-Blue watch, which is to memorate the event which James Cameron succeeded in reaching the deepest Mariana Trench under deep sea.The watch is a high-tech product, with thick case and crystal, best lume material applied on the dial, 116660 could withstand the greatest pressure under water, and the dial could offer you the best readability even in the greatest darkness of Mariana Trench.Now I am pleased to introduce the replica watch of Sea-Dweller Deepsea D-Blue 116660, there are two types of this replica in the market, one is in low quality at cheap price, the other is this one I am going to introduce here, it is made by a big famous factory named “Noob”, we call it N. This factory is good at manufacturing good quality Rolex Submariner and Sea-Dweller replicas.The case is made of 316F stainless steel and has a brushed face, it is 43mm in diameter but seems to be bigger and thicker than other Submariner and Deepsea replicas.
Previous:Previous:patek 5712gr Next:Next:breguet sale
